A balloon payment bridge loan lets an investor pay little or nothing against principal during a short term, then repay the whole remaining balance in one lump sum at maturity. Hard money loans are built the same way. The loan works when the exit is planned before closing: a sale, a refinance into long-term debt, or a payoff from another source of capital. At Jaken Finance Group we lend on the asset, so the property's value and your exit plan drive the structure. Our published rates run from 8.99% to 13.5% on bridge, fix and flip and new construction loans.
TL;DR
- A balloon payment is the single large payment due at maturity, covering the principal that regular payments did not retire. Interest-only bridge and hard money loans typically end this way.
- The balloon is repaid by a sale, a refinance, or other capital. Each exit needs a number you can test before you sign.
- Judge a deal on the exit: after-repair value (ARV), loan-to-cost (LTC), the payment schedule, the maturity date and the extension terms.
- Loans to investors for business purposes generally fall outside consumer mortgage rules, so the loan agreement itself is where your protections and obligations sit.
- Jaken Finance Group offers asset-based bridge, fix and flip and construction loans with no minimum credit score, leverage up to 100% LTC and deferred payment options.
Table of Contents
- What a balloon payment is in a bridge or hard money loan
- How hard money balloons differ from other bridge loans
- Terms to expect: rate, term, points and leverage
- The three exits that repay a balloon
- How to test whether your exit works
- What happens if the exit fails
- Rules that apply to investor balloon loans
- Matching the loan to the project
- Our perspective
- Financing your next balloon-structured deal
- FAQ
- Sources
What a balloon payment is in a bridge or hard money loan
A fully amortizing loan spreads principal across its term, so the balance reaches zero with the last payment. A balloon loan does not. Payments are set below what it would take to retire the principal, often interest only, and the unpaid balance comes due at maturity. Federal disclosure rules under Regulation Z treat a payment more than twice as large as the regular payment as a balloon payment, which is the usual yardstick for the term (12 CFR 1026.18).
Bridge and hard money loans use this structure because of what they are for. A bridge loan covers the gap between a purchase and a long-term outcome: stabilizing a building, finishing a rehab, closing a permanent loan, or selling. Paying down principal in the meantime would take cash away from the project. Interest-only payments keep the carrying cost low, and the balloon lines up with the date the property is expected to be sold or refinanced.
A simple example shows the shape. Take a $300,000 loan at 10% interest only. Monthly interest is $2,500. After 12 months you have paid $30,000 in interest and still owe $300,000. That $300,000 is the balloon. If the loan carries origination points, those are paid at closing and are separate from the balloon.

Balloon payment versus deferred payments
The two are related but not the same. A balloon is a lump sum at the end. A deferred payment structure delays when regular payments begin or lets interest accrue for a period, which also leaves a larger balance to settle at payoff. We offer deferred payment options for investors who want cash in the project during the build, and the payoff plan is set against the same maturity date.
How hard money balloons differ from other bridge loans
The mechanics are the same. The differences are in what the lender underwrites and how long the term runs.
| Feature | Hard money / asset-based bridge | Bank or institutional bridge |
|---|---|---|
| Underwriting focus | Property value, ARV, LTC and the exit | Borrower financials, credit, global cash flow |
| Typical term | Short, commonly 6 to 24 months | Often 1 to 3 years |
| Payments | Commonly interest only | Interest only or partial amortization |
| Closing speed | Days to a few weeks | Weeks to months |
| Balloon at maturity | Full principal | Full or partial principal |
The terms in the table are general market patterns, not a quote. Individual loans vary with the asset, leverage and the borrower's experience. Our asset-based approach means the credit score is not the gate: we have no minimum credit score, and we underwrite to the property. We state closings in as few as 7 to 10 days.
Terms to expect: rate, term, points and leverage
Four numbers define a balloon bridge loan.
- Interest rate. Our published ranges are 8.99% to 13.5% for fix and flip, bridge, new construction and commercial property loans, and 5.75% to 10.5% for DSCR rental loans. Rates were read from our site on September 11, 2026, and can change with the market and the deal, so confirm the current range on the loan options page.
- Term. The maturity date is when the balloon is due. A short term raises the monthly pressure to sell or refinance, a longer one gives the project room for permitting, rehab and lease-up.
- Origination points and fees. Points are a percentage of the loan paid at closing. Add legal, appraisal, title and draw inspection fees when you model total cost.
- Leverage. Lenders express it as loan-to-value (LTV), loan-to-cost (LTC) and loan to ARV. We lend up to 100% LTC, which reduces the cash you put in and increases the importance of a sound exit, because the balloon is larger relative to the project.
Use our loan payment calculator to compare interest-only and amortizing payments, and the fix and flip calculator to test profit against LTC.
The three exits that repay a balloon
Sale
The usual exit for a flip or a development. The payoff comes from the sale proceeds at closing. The test is conservative: price the resale on comparable sales, subtract selling costs (agent commissions, closing costs, transfer taxes) and carrying costs through the whole marketing period, and confirm the remainder covers the balloon with a margin. A flip that works only at the top of the ARV range has no margin.
Refinance
The usual exit for a rental or a stabilized building. A new long-term loan pays off the bridge. Investors in single-family and small multifamily rentals commonly refinance into a DSCR loan, which qualifies the property on its rental income against debt service instead of personal income. Our DSCR calculator shows the ratio before you commit, and the guide on how much you can borrow with a DSCR loan explains the sizing. For commercial assets, the same logic applies with a different take-out: our piece on bridging now and using an SBA loan later walks through one such path.
The refinance test has two parts. The property must appraise high enough that the new loan covers the balloon, and the income must meet the new lender's debt service coverage ratio at the then-current rate. Both depend on the market at maturity, not at closing.

Other capital
Some investors pay the balloon from another source: proceeds from selling a different property, a cash-out from a rental, or a line against equity. If a second property is the source, it must be under contract or have a verified value before you rely on it. A cash-out refinance or an investment property HELOC on an existing rental can fund a payoff and keep the project on schedule.
How to test whether your exit works
A workable exit survives a worse case. Run these checks before closing.
- Stress the value. Cut the ARV or exit value by 5% to 10%. Does the balloon still get repaid with the loan's costs covered?
- Stress the time. Add three months to the schedule. Rehabs run over, permits slip and sales take longer. Compute the extra interest and add it to the cost.
- Stress the rate. For a refinance, model the take-out loan at a rate 1 to 2 points above today's. Check the DSCR or the monthly payment that results.
- Check the leverage. At high LTC, the balloon is close to your total cost. The margin between the balloon and the likely exit value is your safety net, so measure it in dollars.
- Read the extension terms. Know whether an extension exists, what it costs (commonly a fee plus a rate step), and what conditions apply. An extension is a planning tool, and its price belongs in the model from day one.
- Match the payment schedule to cash flow. Interest-only payments need a source: reserves, rent, or deferred payment terms. Fund an interest reserve if the property produces no income during the rehab.
- Set the deadline early. Start the refinance application or the listing well before the maturity date, so a single delay does not become a default.
What happens if the exit fails
The balloon date is a hard date. If the property has not sold and no refinance is available, the loan is due and unpaid, and the lender can act under the loan documents: default interest, enforcement of the lien and, depending on the state and the documents, foreclosure or a claim on a guarantor. Court records show how this unfolds. In a First Circuit case, a balloon that went unpaid in 2012 followed unsuccessful refinancing discussions and led to enforcement proceedings and an appraisal of the collateral (First Circuit opinion, 2022).
The practical lesson is timing. Conversations about an extension or a payoff work best months before maturity, while the loan is performing and the exit is still in motion. Our guides on what happens when a hard money loan matures and on a maturing hard money loan, balloon refinance and extension cover the options in detail. For loans with a personal guarantee, see how recourse is structured on commercial bridge loans.
Rules that apply to investor balloon loans
Consumer mortgage rules, including the limits and ability-to-repay requirements that shape balloon loans on a primary residence, are written for credit extended to consumers. Regulation Z exempts credit extended for business or commercial purposes, which is how investment property loans to investors are generally treated (12 CFR 1026.3). That does not make the loan unregulated. State licensing, usury and foreclosure laws, and the contract itself, still govern the loan, and they differ by state. Investors in Illinois, Florida, Indiana and the District of Columbia should have a real estate attorney review the note, the mortgage and any guaranty before signing. That is the professional who answers the state-law questions, including how foreclosure proceeds in your jurisdiction.
Read the loan documents for these items in particular:
- the maturity date and what counts as a payoff;
- default interest and late charges;
- prepayment terms, including any minimum interest;
- extension conditions and fees;
- whether the loan is recourse to you personally.
Matching the loan to the project
The right structure follows the exit.
- Fix and flip: a short term with an exit by sale, funded against purchase and rehab cost. See how to get a fix and flip loan.
- New construction and build to rent: a term long enough for the build, then a sale or a rental refinance. See new construction loans for investors.
- Acquisition before a long-term loan: a bridge loan that closes fast and is refinanced once the property is stabilized. Chicago investors can look at bridge loans in Chicago.
- Commercial value-add: a bridge to fund purchase and improvements, then a permanent loan. See commercial rehab bridge loans.
Our perspective
We underwrite the property and the exit, because a balloon loan is only as sound as the plan that repays it. A credit score says little about whether a rehab will finish on budget or whether a building will appraise at the take-out value.
That is why we lend with no minimum credit score, up to 100% LTC, with deferred payment options and closings in as few as 7 to 10 days. Speed lets an investor win the deal. Flexible payment terms let the project carry itself until the exit.
Our advice to borrowers is to set the exit before the loan closes and to treat the maturity date as a project milestone. Run the numbers in our calculators, stress the sale price and the schedule, and talk to us early if the plan changes.
Jason Taken
Financing your next balloon-structured deal
Jaken Finance Group lends to real estate investors across the United States: fix and flip, bridge, new construction, DSCR rental and commercial property loans, along with gap lending and refinance products. Underwriting is asset-based, with no minimum credit score, leverage up to 100% LTC and deferred payment options. Review the full menu on our loan options page and start an application when your deal and exit are defined.

Bridge rates published on our site run from 8.99% to 13.5%, and DSCR rental loans from 5.75% to 10.5%. Confirm the current range and your loan terms with us before you commit.
FAQ
Is a balloon payment normal in a hard money loan?
Yes. Hard money and bridge loans are short term and commonly interest only, so the principal is due at maturity as a balloon. The structure keeps monthly payments low while the property is renovated, built or stabilized. The exit, by sale or refinance, repays the balance.
How is the balloon amount calculated?
It is the outstanding principal at maturity, plus any accrued unpaid interest and fees due under the note. On an interest-only loan, it equals the original loan amount plus any funded draws. A deferred payment structure adds accrued interest to the payoff.
Can a balloon payment be extended?
Some loans allow an extension for a fee, and the terms are set in the loan documents. Ask about conditions, cost and timing before closing, and open the conversation months before maturity. Our guide on what happens when a hard money loan matures explains the options.
Do consumer balloon loan rules apply to investment property loans?
Generally no. Regulation Z exempts credit extended for business or commercial purposes, so investor loans fall under contract and state law instead. Have a real estate attorney in your state review the documents before you sign.
Sources
- 12 CFR 1026.18, content of disclosures (CFPB)
- 12 CFR 1026.3, exempt transactions (CFPB)
- United States Court of Appeals for the First Circuit, opinion 19-1251 (2022)
