← Back to blog

Hard Money Deal Structure: LTC, ARV, Draws and Exit

November 12, 2026
Hard Money Deal Structure: LTC, ARV, Draws and Exit

A hard money deal is built from five parts: a loan sized by the property's value and project cost, a down payment, an initial advance plus a renovation holdback, a short interest-only term with points, and a defined exit. Get those five right and the loan is simple to underwrite. Get one wrong, usually the exit or the draw schedule, and a profitable project turns into an expensive one.

This guide walks through each component with a worked example, the cost lines that move your margin, and the ways investors combine hard money with other capital.

Jaken Finance Group
Structure Your Next Hard Money Deal
Jaken Finance Group provides asset-based hard money and fix-and-flip loans for real estate investors seeking speed and flexibility.
Visit

TL;DR

  • Lenders size the loan on three ratios, loan to cost (LTC), loan to after-repair value (LTARV) and loan to as-is value (LTV), and the most conservative result sets the maximum.
  • The loan usually has two pieces: an initial advance at closing for acquisition and a holdback released in draws as work is verified.
  • Points, prepayment terms and draw fees often affect total cost more than a small rate difference on a short loan.
  • Every deal needs a written exit before closing: a sale, a refinance into long-term debt, or a payoff from other capital.
  • Jaken Finance Group lends on an asset-based basis with no minimum credit score, and published fix-and-flip pricing of 8.99-13.5%.

Table of Contents

What a hard money deal is

A hard money loan is short-term financing secured by real property. Investopedia describes it as underwritten mainly on the value of the collateral rather than the borrower's creditworthiness, and typically used by flippers, in turnaround situations and by borrowers with substantial equity. The same source reports that most lenders offer 65% to 75% of the property's value, with terms typically running six to 18 months.

That description is the starting point, but "deal structure" is the more practical question. It covers who contributes what capital, how much is funded at closing, when the rest is released, what it costs, and how the loan is repaid. The sections below take these in order.

The three ratios that set your loan amount

Lenders do not apply a single leverage number. They test the deal against three ratios and fund the lowest result.

RatioWhat it comparesWhy it matters
LTC (loan to cost)Loan against purchase price plus rehab budgetLimits how much of the total project the lender funds
LTARV (loan to after-repair value)Loan against projected value after renovationProtects the lender's exit if the property must be sold
LTV (loan to as-is value)Loan against current valueControls risk on the acquisition advance

The Baseline fix-and-flip guide explains that the most conservative of the three controls. Its worked example uses a $200,000 purchase, a $60,000 rehab, $260,000 total cost and a $370,000 ARV. At 90% LTC the loan would be $234,000. At 70% LTARV it would be $259,000. The LTC cap is lower, so the maximum loan is $234,000.

The practical lesson: when your ARV is strong relative to cost, LTC is the binding limit and your cash requirement follows from it. When a deal is thin on ARV, LTARV binds and you may need to bring more capital than the headline LTC suggests. Run both numbers before you make an offer. Our fix and flip loan calculator estimates LTC and profit on a given deal.

Your cash in the deal

BiggerPockets' lender interview puts the typical down payment at 15% to 20% of the total deal price, meaning purchase price plus renovation budget. That figure varies with location, borrower experience and project size, and the loan funds the renovation through draws rather than asking the borrower to pay it out of pocket.

For the Baseline example, a 90% LTC loan leaves $26,000 as the borrower's contribution on a $260,000 project. Add closing costs, points paid at closing and interest reserves, and the true cash requirement is higher than the down payment alone. Build a cash-to-close figure that includes all four.

Our positioning is built around high leverage: Jaken Finance Group offers up to 100% LTC on qualifying projects, with no minimum credit score and asset-based underwriting. Leverage depends on the deal, the property and the borrower's experience, so request a scenario review for your numbers.

Your cash in the deal

Initial advance and renovation holdback

Baseline describes every fix-and-flip loan as having two components: the initial advance, wired to the title company at closing to cover acquisition, and the construction holdback, disbursed in stages as work is completed and verified through inspections or draw requests.

Initial advance followed by verified renovation draws

The holdback structure exists to keep loan funds tied to value created. Releasing renovation money in increments means a borrower who stops mid-project does not leave with the full budget, and the lender maintains control over collateral value at each stage.

How a draw typically works

  1. You complete a defined phase of work, such as demolition, framing or mechanicals.
  2. You submit a draw request with photos, receipts or lien waivers.
  3. The lender verifies the work, often with an inspection.
  4. Funds for that phase are released, either to you as reimbursement or to contractors.
  5. The cycle repeats until the budget is drawn.

Shuk's term sheet guide confirms that draw schedules release rehab funds after work is completed and verified by inspection, photos, lien waivers or receipts. For your own cash flow, this means contractors are usually paid first and reimbursed after verification, so you need working capital to bridge each draw cycle. Ask how many days a draw takes, how many draws are allowed and whether each carries an inspection fee.

Holdback mechanics also appear in purchase contracts. In Florida, for instance, buyers and sellers sometimes use Florida escrow holdbacks to reserve closing funds against unfinished items, which is a different instrument from a lender's rehab holdback but one worth keeping distinct on your settlement statement.

Rates, points, terms and prepayment

Pricing has four levers. Reading a term sheet means pricing all of them, not only the interest rate.

  • Interest rate. Shuk's 2026 guide reports that in 2025 typical hard money rates commonly ranged about 9.5% to 15%. Our published range for fix-and-flip, bridge and new construction loans is 8.99-13.5%.
  • Points and fees. The same guide reports points and fees often run 1% to 4%, most commonly 2% to 3%. Points are charged on the loan amount and usually paid at closing.
  • Term. Hard money loans are typically short, often 6 to 36 months, and frequently interest-only.
  • Prepayment. Penalties commonly appear as a minimum interest period, for example three months guaranteed, or as step-down penalties.

A cost example

Using Shuk's figures, a $250,000 loan with 3 points costs $7,500 upfront. Nine months at 11% interest adds about $20,625, for roughly $28,125 before other fees. The guide also notes that on short timelines, a 1% rate difference over six months on a $250,000 balance is about $1,250, while a single point is $2,500. On a six-month flip, one point can outweigh a full percentage point of rate.

When you compare offers, convert each into total dollars over your expected hold period, including points, draw and inspection fees, and any minimum interest. Our rate range is published on the loan options page, and DSCR rental loans, which suit longer holds, are listed there at 5.75-10.5%.

Deferred payments

Interest-only monthly payments are the common structure, but cash flow during renovation is still a real constraint on a vacant property. We offer deferred payment options on qualifying loans, which keep monthly obligations off the project until the exit. Deferred interest accrues and is paid at payoff, so include it in your profit model.

Putting the numbers together

Here is a full pro forma using the Baseline example and Shuk's pricing assumptions. It is an illustration, not a quote.

LineAmount
Purchase price$200,000
Rehab budget$60,000
Total project cost$260,000
ARV$370,000
Maximum loan (90% LTC controls)$234,000
Borrower contribution before closing costs$26,000
Points at 3% of $234,000$7,020
Interest, 9 months at 11% on the full balance$19,305

The interest line assumes the entire loan is outstanding for nine months, which overstates cost because the rehab portion is drawn over time. That is a conservative way to model it. Add insurance, taxes, utilities, title fees, agent commissions and a contingency for overruns, then subtract everything from the $370,000 ARV. If the spread leaves less than your minimum profit, change the structure before you change the offer: shorten the schedule, lower the rehab scope or negotiate points.

Combining hard money with private money

The capital stack is the order in which funds sit behind a property. A hard money loan is usually the first lien. The borrower's cash or a partner's capital covers the gap between the loan and total cost.

Common combinations include:

  • Hard money plus a cash partner. A partner funds the down payment in exchange for a share of profit or a fixed return. The lender still holds the first lien.
  • Hard money plus a second-position loan. A second lien covers part of the equity contribution. The first lender's approval is typically needed, and the combined leverage still has to fit the lender's limits. We offer second-position and gap lending products for this purpose.
  • Hard money for acquisition, private money for rehab. Less common, because draws and holdbacks are normally part of the hard money package.

The tradeoff is cost and complexity. Every added layer introduces its own interest, fees and repayment priority, and the total cost of capital rises as leverage increases. For a longer comparison, see our guide on hard money versus private money for fix and flip.

Exit strategy: build it before you close

A short-term loan is only as strong as its exit. There are three standard exits, and each carries its own risks.

  1. Sale. Repayment comes from the sale proceeds. The risks are overrun budgets, an ARV that comes in lower than projected and a longer time on market than the term allows.
  2. Refinance into a rental loan. Common for build-to-rent and buy-and-hold investors. The property must stabilize and meet the long-term lender's requirements. A DSCR loan underwrites on the property's rental income relative to debt service, so test your rent assumptions with the DSCR calculator before you commit.
  3. Payoff from other capital. A cash-out refinance on another property, a portfolio refinance or a HELOC on an investment property can retire the loan.

Build margin into the schedule. If your plan needs five months, choose a term that gives you eight or nine, and ask about extension fees in advance. BiggerPockets' lender notes most of its loans carry a five-month term with options from 5 to 12 months, so term length varies widely by lender and product.

State and local considerations

Investors in Illinois, Washington, D.C., Florida and Indiana face different recording practices, title processes, permitting timelines and local requirements, and those can change how fast a project moves. Permit delays, in particular, lengthen the time a loan stays outstanding and should be reflected in your term and interest reserve. Have a local real estate attorney or title company confirm requirements that apply to your closing and loan documents, and confirm that the lender's loan is structured as a business-purpose loan for investment property. We lend nationwide, and our Chicago fix and flip page covers that market in more detail.

Our perspective

We structure loans from the property outward. The questions that matter are the purchase price, the renovation scope, the after-repair value and the exit, and our underwriting is asset-based so the deal carries the file rather than a credit score.

In our experience, investors lose margin in structure, not in the rate. A loan that funds a high share of cost, defers payments during renovation and closes within days lets an investor keep working capital for the next project. That is why we offer up to 100% LTC, no minimum credit score and closings in as few as 7 to 10 days.

Our advice is to bring a complete scope of work, a realistic ARV and a written exit plan. Those three documents shorten underwriting and tend to produce a cleaner draw schedule.

Jason Taken

Structure your next deal with Jaken Finance Group

We provide fix-and-flip, bridge, new construction, DSCR rental and commercial loans to investors nationwide, with asset-based underwriting and no minimum credit score. Fix-and-flip, bridge and new construction loans are published at 8.99-13.5%. Send us your purchase price, rehab budget and ARV and we will structure the loan around them.

Jaken Finance Group

Start with our fix and flip loan options, or read how to get a fix and flip loan before you apply.

FAQ

What is a typical hard money loan structure?

A typical structure is a short-term, interest-only first-lien loan sized on LTC and ARV, with an initial advance at closing and a renovation holdback released in draws. Terms commonly run 6 to 36 months, and points of 1% to 4% are charged at closing, according to Shuk's term sheet guide.

How much down payment does a hard money deal need?

BiggerPockets' lender reports 15% to 20% of purchase price plus renovation budget, varying with location, borrower history and project size. Closing costs and points are usually additional. Leverage terms differ by lender and deal, so request a scenario for your numbers.

Can I combine hard money with private money?

Yes. A common approach is hard money in first position with a partner's cash or a second-position loan covering part of the equity. The first lender's rules on combined leverage apply, and each added layer adds cost.

How are renovation funds released?

Through draws. You complete a phase of work, document it with photos, receipts or lien waivers, and the lender releases that portion after verification. Ask about draw turnaround time and inspection fees before you sign.

Sources